Reset Episode numbering to 1 for different seasons.

Post any Bulk Rename Utility support requirements here. Open to all registered users.

Reset Episode numbering to 1 for different seasons.

Postby dvaz » Mon Jun 11, 2018 5:11 am

Hi,

My problem is that the files are arranged in Seasons folders ( which is good ) but file names are sequential

Season 1
MyShowS01E01....mkv
.
.
MyShowS01E24....mkv

Season 2
MyShowS02E25....mkv
.
.
MyShowS02E49...mkv

Is there a way to change the 25...49 into 1...24 again?

Thanks!
dvaz
 
Posts: 2
Joined: Mon Jun 11, 2018 5:06 am

Re: Reset Episode numbering to 1 for different seasons.

Postby Emerkamp » Mon Jun 11, 2018 10:39 am

Hi,

Under Section:
Numbering (10)

You can Tick (Folder). This resets the counter when entering a new folder/subfolder.

Break controls this also...by parts of filename changes
Emerkamp
 
Posts: 140
Joined: Sat Aug 23, 2014 2:35 pm

Re: Reset Episode numbering to 1 for different seasons.

Postby dvaz » Tue Jun 12, 2018 6:36 am

Emerkamp wrote:Hi,

Under Section:
Numbering (10)

You can Tick (Folder). This resets the counter when entering a new folder/subfolder.

Break controls this also...by parts of filename changes


Hi,thanks for the help. Been trying to play with the numbering section, still can't get it to work.

Here is what i have:

Basically i want to replace S03E97 and subsequent episodes to S03E01 and so on. ( 97 = 01, 98 = 02, etc )

Image
dvaz
 
Posts: 2
Joined: Mon Jun 11, 2018 5:06 am

Re: Reset Episode numbering to 1 for different seasons.

Postby Emerkamp » Tue Jun 12, 2018 9:50 am

Hi,

Best way I see, not knowing your file paths/ folder tree. (Looks like all is in 1 big folder by your settings).

First, Select the files, Range start to end.
Then use (5) to cut out the part your renumbering. ect.. POS 10 to 13
Then (10) to renumber and set it ( @ ) POS 10, where you cut out in step above, staring with 1.

Did you read under program, help/index/autonumbering. This explains how...
Emerkamp
 
Posts: 140
Joined: Sat Aug 23, 2014 2:35 pm


Return to BRU Support